MICRO ISCHELL X-48JC 9V BATTERY - HANDPAN PICKUP

Micro contact handpan X48JC with 9V battery

Manufactured and assembled in France, the X-Jack contact microphone allows a removable installation, has a 45 cm microphone cable, a Jack and XLR output simultaneously possible and works with phantom power or on 9v battery (500H) automatically. High levels on stage.

THE X48JC is equipped with the new type of contact microphone developed by the brand ISCHELL in 2008, in order to reproduce with the greatest fidelity the acoustics of your instrument, the attack, the timbre, the woody color, your playing and your playing nuances, without the problems of feedback and the resumption of surrounding sounds (Repisse ). Our hybrid Air / Contact technology works without a filter between the membrane and your instrument's soundboard. We thus reproduce on a reduced and isolated scale an ultimate aerial sound recording, controlled by the immediate environment of our specific audio adhesive paste.

The sound is comparable to an aerial microphone, fidelity, warmth, width, air… With the acoustic insulation and the feedback resistance of a cell allowing high levels face / returns. You can easily use it in an amp, apply effects or make clean loops. A revolution in the amplification of many instruments on stage! An innovation ISCHELL !  

The X-48JC is easy to use, it can be fixed inside the handpan and stay in place (test it according to your model to find the right place), or be positioned outside on the dome or the back (reusable fixing paste). The system block can be attached to the bottom or to a stand.

NB: We strongly recommend that you take a few minutes to read the above downloadable instructions. Indeed, it is important to respect a few principles in order to benefit simply and quickly from these new systems.

Specifications:

• C3 contact microphone kit.
• Cable 25cm to 65cm depending on the instrument, 2mm in diameter
• Fixed installation: Jack to be installed in the instrument with drilling,
• Removable installation: Fixing plate for the jack on the instrument or a stand by double-sided or Velcro,
• Cello: The plate is curved to be able to be fixed on the front of the tailpiece
• Double bass: Plate for fixing the Jack between two ropes
• Requires a connection cable from the microphone to the module in Jack/Jack mono
• Operates on 9/48v phantom power.
• Balanced XLR output. Requires XLR/XLR cable
• X48C3-T New through-feed electronics, very high-end components, low cut 2 positions available on the case: Flat / 180Hz
• Belt clip
• audio adhesive putty Ischell provided
• Double-sided adhesive tape and Velcro scratch supplied with removable options
• Microphone dimensions: Height 12/13 mm with the putty - Diameter: approximately 25 mm
• Module dimensions: 95 x 30 x 25 mm
• Online user manual
• Storage bag

The Ischell microphone is guaranteed for 2 years.